Heavy cut #1 473ml

Heavy cut #1 473ml
Sea-Shield Heavy Cut # 1 Compound was designed to remove heavy oxidation, moderate scratches, and heavy chalk residues from both painted and unpainted gelcoat surfaces.
Price:
NZ$ 48.45
Out Of Stock

Sea-Shield Heavy Cut # 1 Compound was designed to remove heavy oxidation, moderate scratches, and heavy chalk residues from both painted and unpainted gelcoat surfaces.

BENEFITS

Removes heavy scratches and oxidation

Removes 1000 grit sand paper marks

Breaks down evenly for uniform finish

DESCRIPTION This compound was designed to remove heavy oxidation, moderate scratches, and heavy chalk residues from both painted and unpainted gel coat surfaces. Follow with Sea-Shield®Cut & Polish #2 to restore gloss. Used by professionals looking to restore severely damaged gel coat to its original gloss. For very dry gel coat add Sea-Shield Buffing Lube for better results.

INSTRUCCTIONS Best results are achieved when using a circular polisher (1000-1500 R.P.M) equipped with compound wool buffing pad #1. Start machine using medium pressure while working in a two foot by two foot area. Move machine slowly back and forth keeping pad flat on the surface at all times. Spur buffing pad with light pressure and rebuff surface until most of the residue is gone. Wipe remaining residue off using a clean microfiber towel. ( Use Sea-Shield Buffing Lube as needed).

RECOMEND SURFACE

Paint

Gelcoat

© Copyright Eminent Marine Ltd - Site map
Auckland New Zealand

Website Builder - Website World