Sea-Shield Cut & Polish # 2 removes light oxidation, fine scratches, and light chalk from both painted and unpainted Gelcoat.
Removes light scratches and chalk residue
Restores faded gel coat and paint
Removes heavy compound marks
DESCRIPTION This product removes 1500 grit sand paper haze and scratches on gel coat and painted surfaces. It also removes light oxidation, fine scratches, and chalk from both paint and gel coat. Follow with Sea-Shield ®Swirl Remover# 3 to restore gloss.
INSTRUCCTIONS Best results are achieved when using an air or electric circular polisher (1000-1500 R.P.M) equipped with compound wool buffing pad #2. Apply product to pad or surface to be buffed. Spread product before starting machine to reduce product sling. Start machine using medium pressure while working in a two foot by two foot area. Move machine slowly back and forth keeping pad flat on the surface at all times. Reduce pressure as product begins to dry. Spur buffing pad with light pressure and rebuff surface until most of the residue is gone. Wipe remaining residue off using a clean microfiber towel. (Use Sea-Shield Buffing Lube as needed.)